New Autoclavable brushless DC motor range and sterilisation cycles

Autoclavable DC motors together

There are many different benchmarks in the marketplace for the sterilisation capabilities of devices. maxon motor explain the cycle and testing process for Autoclavable brushless DC motors.

maxon motor develop brushless DC motors that can be sterilised for medical and dental applications. Recently released is the new ECX range of motors with sterilisation capability on 13,16,19 and 22mm diameter versions. The new range of motors complement the existing 4 pole sterilisable 30mm brushless 150W motor and offer high speed capability up to 120,000rpm. maxon motor test the brushless motors to either 1000 autoclave cycles or 2000 cycles depending on the product. For motors with hall sensors fitted the motor is typically cycled through 1000 autoclave cycles and without hall sensors 2000 cycles. Gearheads are available with additional shaft seals. With the additional seal they are tested to 2000 cycles and without, 1000 cycles. Another new product that offers a completely sterilisable positioning system for the first time is an encoder rated and tested for 1000 cycles.

The maxon motor internal autoclave testing is carried out with the autoclave with a vacuum phase. The motors are unpacked and mounted without any additional protection. Three vacuum cycles are made at the beginning to ensure the internals of the motor become damp. The sterilisation atmosphere is built up with steam which remains constant for 18 minutes at 134˚C, 100% humidity and 2.3 bar of pressure. The unit is then cooled to 70˚C and dried. Each individual autoclave cycles takes approximately 1 hour. After 100 cycles the motors are removed from the autoclave and visually checked and motor operation is checked. Following this the motor is then removed after 250 cycles and visually checked in addition to data acquisition of the running data, motor noise, vibration and electrical strength test at up to 500V DC. Typical batch test cycles are conducted with 10 pcs and the tests are repeated with design changes. Internal testing of the motors to 2000 cycles takes approximately six months.

Contact maxon motor Australia for assistance with Autoclavable brushless DC motor options Tel. +61 2 9457 7477.

Discontinuation of maxon EC19 DC motor and GP19 planetary gearhead

ECX-Speed STE 22L_9_450px

With the introduction of the ECX 19 SPEED brushless DC motors, maxon are phasing out the EC 19 and Planetary Gearhead GP 19.

The EC 19 and the GP 19 M were officially introduced in 2014. They will be replaced with brushless DC motors – the ECX SPEED 19 series. Final orders will be received up to December 22, 2017 with last delivery scheduled for March 30, 2018.

The alternative is the brushless ECX range of DC motors. Configurable online, these brushless DC motors are sterilisable, have ceramic bearings and are available with or without hall sensors. With an ironless winding these DC motors have an exceptionally large speed range, high power, excellent control characteristics and are highly durable. Choose from matching gearheads and with the option to configure the electrical connection.

For more information on an alternative DC motor or for application assistance, please call maxon motor Australia on tel. +61 2 9457 7477.

 

New DC motor and drive catalogue

Catalogue_2017-18_450px

maxon motor have released the digital edition of the new 2017 / 2018 catalogue. Answering the how to’s of motor control it contains valuable motor and motor control reference material.

Containing 480 pages of motor, gearhead and controller information and useful educational material including a technology breakdown, calculation examples and conversion tables the manual is available now for downloading or online reading. New technology listed includes the customisable stainless steel DC motors in 6mm and 8mm. Information on the new very high speed 13mm BLDC brushless DC motor technology that can be sterilised for medical applications. Ultra-small diameter planetary gearing and high speed gearbox designs and the very latest in motion control, explaining modular decentralised DC motor position controllers and high power density DC servo amplifiers.

The link directly to this free information is http://epaper.maxonmotor.com.au or contact our Sydney, Australia office on +61 2 9457 7477.

More choice from maxon: sterilisable brushless DC motors

ECX_SPEED_13M_GPX_SPEED_13_ENX13_full_450px

 

Maxon now offer more sizes in their sterilisable range of brushless DC motors, gearheads and an all new encoder.

Now available in a 13mm diameter is the brushless DC motor (ECX SPEED range) with accompanying planetary gearheads (GPX 13 SPEED) and the first of its kind sterilisable Encoder (ENX 13 EASY INT). All fully configurable, sterilisable and optimised for high speeds and low vibration output, making them perfect for demanding speed and positioning control tasks in surgical applications.

A stand-out feature of the sterilisable encoder is the chip used for generating the commutation signals in the Hall sensor version. When coupled with the brushless DC motor ECX SPEED 13 it facilitates extremely precise commutation and reduces heat. The encoder can be integrated within the motor to optimise costs and assists in applications with tight space restrictions. The DC motor combination can be configured online and ready to ship in 11 working days.

For more information please contact maxon motor Australia tel. +61 2 9457 7477.