Renewable wind energy harvested from an altitude of 500m.

Clean energy from alt 500m-Kite

A new method of garnering renewable energy is being explored and it’s not from wind turbines.

A Dutch start-up company, KitePower is creating a system to produce green energy from Kites. In collaboration with the Delft University in the Netherlands, the approach consists of a generator on the ground that is connected directly to a cable winch that has a steered kite attached. The kite pulls the cable upward by flying in a figure-8 pattern creating a strong tractive force with the ability to reach heights up to 500 metres. When altitude is achieved the cable is retracted (using very little energy) and the procedure is repeated.

The device offers an attractive alternative to diesel generators and wind turbines. In comparison the kite needs less material for construction, is more mobile and can flexibly use winds up to 500m. Of particular benefit to secluded communities, military camps or remote islands the first commercial version is due for release at the end of 2018.

Maxon motor is one of a few companies assisting KitePower. Maxon’s expertise is in developing the control unit for the steering movement of the kite. This included integrating DC motors, different sensors, transmitters, receivers and batteries while considering extreme radial forces on the gearhead. The device uses maxon’s Ec-i 52 DC motor with planetary gearhead and encoder. This combination is usually found in robotics applications for its high torque and compact design.

For further information contact maxon motor Australia tel. +61 2 9457 7477.

A lot goes into maxon motors and they go into a lot of things.

Subsea_Thruster_MT30-450px

First earth, then outer space and now underwater. The new Aquatic division at maxon motor develop DC motor actuators, thrusters and systems for subsea use.

Focused on applications that require reliability and efficiency the new maxon subsea motors use BLDC (brushless DC motors) in pressure compensated oil filled housings. ROV and AUV applications will benefit from maxon motors’ lighter and more powerful new solutions including four new thruster sizes. The MT20, MT30, MT40 and MT70 can be used at depths to 6000 meters with their corresponding maxon pressure compensators. The maxon thrusters for AUV and ROV applications also have the ability to have the propeller geometry optimised for special requirements, or to use the standard propeller geometry that is most efficient in one direction and has approximately 80% in reverse thrust. External componentry of the thrusters are made from titanium or plastic for use in salt water and all parts have been isolated to prevent galvanic reactions.

A dedicated subsea area with data sheets, application solutions and stories from the field can be found by searching for aquaticsolutions.maxonmotor.com or contact maxon motor Australia on +61 2 9457 7477.

 

 

 

 

New DC motor technology released from maxon.

Brushless_frameless_motor2-195px

maxon motor is introducing new miniature brushless DC motors, brushless frameless motors in kit form and EtherCAT positioning controller solutions.

A number of new products are released from DC motor drive specialist maxon motor. More configurable brushless DC motors (from the ECX SPEED range) in both Standard and High Power options are available with diameters of 13mm and 19mm, along with matching planetary gearheads and encoders. This brushless DC motor has very high speeds and is particularly suitable for power tools and demanding speed & positioning control tasks. All components can be configured online. These customised drives are assembled using automated processes and are ready for shipping after no more than 11 working days.

Newly released is the popular high-torque powerful brushless flat DC motor available in a frameless kit. This means that the stator and rotor are delivered separately and joined only during the assembly of the device. This brushless frameless kit is especially suitable for robotics applications where space is constrained.

Maxon have also developed their compact EPOS4 positioning controller to be equipped with an EtherCAT expansion board for integration into any EtherCAT network.

These innovations are on display from November 28 to 30 at the SPS IPC Drives exhibition in Nuremberg, Germany.

For more information on any of the above new products please contact maxon motor Australia tel. +61 2 9457 7477.

maxon establishes collaborative innovation lab.

LucerneUniSciences-Driven

maxon motor have formed an innovation lab with the Lucerne University of Applied Sciences and Arts.

The Lucerne University of Applied Sciences and Arts has entered a partnership with maxon motor headquarters by setting up an R&D lab on campus. Perfectly married where the University contributes its R&D expertise in the fields of robotics, mechatronics and embedded systems; and maxon motor will supply DC motors and accessories alongside practical experience. The aim is to develop intelligent mechatronic systems at the grass-roots level.

For more information please contact maxon motor tel. + 61 2 9457 7477.

New 30mm brushless DC motor range.

ECi52_long_450px

maxon motor have released a new range of 30mm diameter brushless DC motors in versions that offer increased torque or increased speed.

The new range will initially consist of 4 power versions ranging from 30 to 75W. They feature uncompromised quality with all stainless steel laser welded flanges and body. Stainless steel large dimension preloaded ball bearing system and a hardened stainless steel shaft. They integrate into the maxon modular system with a range of encoder and gearbox selections allowing engineers to create a dedicated mechatronic solution for each application. The range uses the latest production technologies offered by maxon motors new manufacturing facility in Korea which achieves a cost competitive solution suitable for general automation, power tools, seat actuators and process control machinery. Maximum speeds of 15,000rpm and selectable winding configurations allowing for use on 12V, 24V and 48V DC systems add versatility and this is coupled with torque levels over 100mNm from a 30mm diameter motor. These features give the new product series a unique offering compared with traditional maxon brushless DC motor products, further expanding application possibilities.

Contact maxon motor Australia for assistance or information. Ph: +61 2 9457 7477.

Driven magazine: out now.

Front Cover driven Nov17

maxon motors global magazine takes a look at startup companies, service robots and DC motor technology.

Startup companies are exciting and driving the world of innovation and technology. Maxon looks at four companies launched recently that have addressed simple solutions to everyday challenges and interview a founder of one of the startups. The magazine covers service robots and the pros and cons they offer, we visit a delivery service for organic products in Lausanne and take a closer look at soccer robots that played in this year’s RoboCup final.

driven is all about DC motor and drive technology and is published twice a year in three languages. All previous issues are available online in the driven app, which can be downloaded from the App Store and Google Play Store.

For further information contact maxon motor Australia tel. +61 2 9457 7477.