New levels of torque and position capability are now possible with the development of adaptive hardware for maxon low profile brushless DC motors and harmonic planetary gearheads.
Pictured is a combination showing the maxon brushless DC 70W 24V motor, 2048 counts per turn internally integrated encoder and the new harmonic light weight low profile zero backlash gearhead. The gearmotor assembly increases the torque and reduces the size of previous solutions using planetary gearbox technology. The output capability is 19Nm repeated and 31Nm intermittently, which is ground-breaking for a combination just 55mm diameter and 59mm long for all three components. Having and internal encoder and a zero backlash gear makes the unit ideal for robotic joint and positioning applications in industrial automation, process control and also for precision laboratory and scientific equipment.
Contact maxon motor Australia on +61 2 9457 7477 for further information or assistance
Ice-core drilling is nothing new. But maxon motor developed a DC motor gear combination that can drill up to eight times faster than existing drilling, 600 metres below thick ice.
Conventional ice-core drilling takes a long time. The 3.4km deep hole at Dome Concordia in the Antarctic took five years to complete. 800,000 year old ice was retrieved which, up until now is the profoundest look into the history of the Earth’s core.
Using maxon motor DC technology, several small drill-sites of approximately 600 meters are bored to ascertain the correct position to deep-drill. The thickness of the ice and the geothermal heat indicate if it is worth drilling deeper to yield useful scientific results. A process that would previously take two months to complete, but now with maxon DC motors takes seven days.
The DC motor gearhead combination selected for this task was an off-the-shelf, maxon EC 45 250 Watt motor combined with a GP 52 planetary gearhead. Some modifications were made however the basis of the selection was the high power and high torque, with the ability to vary the speed of the motor at a constant torque. Most importantly, the DC motor had to fit into a very compact space within the drill and withstand extreme temperatures.
For application assistance on DC motors for mining, subsea, oil & gas or extreme environments, contact maxon motor Australia on tel. +61 2 9457 7477.
maxon motor’s new motion controller for DC motors is very small indeed. Just 17g and 39mmx54mm the position controller can also control both brushed DC motors and brushless DC motors (BLDC motors).
Available on request is the newest version of the successful EPOS DC motor control modules, the EPOS4 24/1.5. The tiny dimensions of the controller belie it’s capabilities. It retains the full motion control capabilities of much larger controllers including RS232, USB, CanOpen and EtherCAT communications onboard or via adaptor modules. Feedback from the DC or BLDC motor is achieved using either hall sensors, incremental encoders or absolute encoders. It can be used with current / torque control, closed loop speed control and position control. Designed primarily for use on 12V or 24V systems the controller is based on a very high PWM frequency of 100kHz for adaption with highly dynamic ironless and coreless DC motors that have low inductance levels. Current limiting, overcurrent, over temperature, under voltage, overvoltage and short cct protective functions are all included as standard. Free setup software for auto configuration and tuning of motors is supplied along with programming examples for PC, PLC, Labview and Linux environments. IEC61800-5-2 based Safe Torque Off (STO) also makes the controller suitable for use in critical applications such as manufacturing processes and collaborative robotics.
For further information or for application assistance contact maxon motor Australia tel. +61 2 9457 7477.